Motorsports

I have a Honda NR750 oval piston that had not been started for 7 years. Needless to say, the injectors were clogged and the bike would not start. This engine has 2 injectors per cylinder. for a total of 8. I tagged each injector and shipped them to ProFlow. When Greg tested the injectors before cleaning, the flow patterns were all over the map, and the flow rates wildly different. He took extra effort to ultrasonically clean the ones that were especially badly clogged until he got the flow rates close to each other. They were mailed back within a week, with before and after flow rates and resistance levels checked, and every injector inscribed with the tagged number. They kept me informed at all points along the way about their progress. These are ultra rare injectors as Honda does not make spares for this bike. I would trust ProFlow again with these. Good job, guys!

just wanted to thank you for the injector service. The bike went to the dyno before the work and make 165 with an unsteady fuel flow. After the motor refresh (rings, degree cams, etc.) and injector service, the bike came up to 179 with steady fuel flow. Thanks again, this service is def worth the money!

I just wanted to say thanks to Greg for a very quick turn around on my injectors for our Sea Doo. He was honest and knowledgable about his craft. I have since given his name to a couple of my friends, one of whom owns a cycle repair shop and another who owns watercraft repair store. It runs great!!
Thanks
Michael W.

They did mine and they squirt nicely.

OK, one week exactly and they are back and ready to install. They left last Tuesday and they are here today. Very nice. I have a form that came back to let me know what they were doing before, and what they do now after the cleaning… It’s a cheap way to know what’s going on in there. – Thank you Greg.

Good folks, good work, good results. From my TLR to my ’88 CRX.

Well worth doing. We had great results with Greg.

Excellent service, recommended.

They do all the injector service on all my bikes. Very happy with the service they provide. My engine builder/tuner thanks them too!

Your cleaning job fixed all the problems my Viper was experiencing.  It now idles and drive like brand new!! Who would have thought at 28,000 miles that was the problem. But it is a 1997 model GTS so 13 years of light driving adds up.
Thanks

My R6 injectors were all within spec, however, my GSX-R injectors were not flowing to optimal specs and I ended up re-tuning that bike after the service.  I was able to gain h.p. over my previous map even after re-mapping on a less expensive race fuel!

IT WORKED!!!! – In 6 years of shit ass idling/running from that bike, I tried everything: 2 sets of plugs, wires, valve adjustments, throttle body balancing, about 200 gallons of Seafoam, 50,000 searches for vacuum leaks. Nothing worked. I send the injectors to MelkMan at ProFlow. Get them back within a week. Install and presto. Perfect. Now maybe I won’t sell it.  RIGHT THE F@CK ON!!!!!!!!